| uct | Size (Diameter) | Active area | Permeate flow rate | Stabilized salt rejection | |||
|---|---|---|---|---|---|---|---|
| mm | inch | ft² | m² | gpd | m³/d | % | |
| CPA2-4040 | 100 | 4 | 85 | 7.9 | 2,250 | 8.5 | 99.5 |
| ESPA1-4040 | 100 | 4 | 85 | 7.9 | 2,600 | 9.8 | 99 |
| ESPA2-4040 | 100 | 4 | 85 | 7.9 | 1,900 | 7.2 | 99.6 |
| ESPA4-4040 | 100 | 4 | 85 | 7.9 | 2,500 | 9.46 | 99.2 |
| YQS-4040 | 100 | 4 | 78 | 7.2 | 3,000 | 11.4 | 99 |
| CPA3-LD | 200 | 8 | 400 | 37.1 | 11,000 | 41.6 | 99.7 |
| CPA5-LD | 200 | 8 | 400 | 37.1 | 11,000 | 41.6 | 99.7 |
| PROC10 | 200 | 8 | 400 | 37.1 | 10,500 | 39.7 | 99.75 |
| LFC3-LD | 200 | 8 | 400 | 37.1 | 11,000 | 41.6 | 99.7 |
| SWC5-LD | 200 | 8 | 400 | 37.1 | 9,000 | 34.1 | 99.8 |
Description
Related products
PURAN Brackish Water RO Membranes
Puran BWRO Membranes have performed very well in drinking water purification, power plants condensate water purification, industrial production water purification and other similar salted water purification.
Its stable salt rejection rate and high flow rate working at low pressure is bringing obvious economic benefits to our customers.
WJ Multistage Horizontal Centrifugal Pump
Technical Data
- Power supply: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Maximum inlet pressure: 2 bar
- Fluid temperature range: +5°C to +35°C
- Maximum operating pressure: 6 bar
- Protection class: IP44
- Suction and discharge connection: G 1
Design Features
- Pump housing made of stainless steel (1.4301)
- Impeller made of stainless steel (1.4301)
- Shaft made of stainless steel (1.4005)
- Mechanical seal: ceramic/carbon
- Diffuser and injector made of Noryl
- Seals made of NBR
Applications
- Pumping water from wells
- Filling, emptying, and transferring water
- Irrigation and sprinkler systems
- Emergency pumping for overflow situations
Vonmtron-XLP
XLP Series: Extremely Low Pressure RO Element
Brief Introduction
XLP series (extremely low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of surface water and underground water. Its operation pressure is about 1/2 of low pressure membrane, and the rejection rate can reach 98%. Thus it can reduce the investment cost of related pumps, pipelines, containers and other equipments and the operation cost of reverse osmosis system, improve economic benefits.
Scope of Application
XLP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 1000 ppm, It is especially suitable for the second pass of two-pass RO system. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
Specifications and Major Properties
2GK Dynamic Centrifugal Pump
Application Limits
- Maximum suction head: 8 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 5 bar
- Voltage fluctuation: within ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Suitable for transferring clean water without abrasive particles or liquids with similar properties to water
- Commonly used in garden irrigation and vegetable greenhouse water supply
- Ideal for livestock and breeding industry water supply and drainage
- Applicable for use with various supporting equipment and systems
Heron Industrial RO Membrane
Heron Industrial RO Membrane Elements are made by the most advanced technique polyamide Japanese RO membrane sheets and combined with experience in the process of rolling membranes for years. Heron Industrial RO Membrane performance is excellent and continuously stable exceptionally. Covering a complete range from 200GPD to 13200GPD.
FEATURES OF HERON INDUSTRIAL RO MEMBRANE
Uses the most advanced USA membrane film technology and manufacturing processes
Provides high rejection stability even with high TDS manufactured in our ISO 9001:2008 Certified Facilities,
No fouling, Less frequency cleaning, and More Consistent
100% Performance and Quality Tested before shipment
Backed up by our Experienced Technical Support Staff for designing the plant.
High Quality for Consistent and Reliable Performance
Standard and universal dimensions to fit in commonly available housings
Require lower consumption of chemicals and longer life.
Vontron-LP
LP Series: Low-Pressure RO Element
Brief Introduction
LP series (low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of brackish water. It has the characteristics of low pressure in operation, high permeate flow, and excellent rejection performance in removing solvable salts, TOC, SiO2, etc. It is especially suitable for the preparation of high-purity water in the electronics and power industry.
Scope of Application
LP series is normally suitable for treatment of brackish water, surface water, underground water and municipal water with TDS is less than 10000 ppm. It is mainly used for producing various scales of bottle water, drinking water, industrial used pure water, high purity water, boiler replenishment water, also for wastewater reuse, material concentration, purification and refining purposes.
Specifications and Major Properties
Vontron-ULP
ULP Series And Series: Ultra-Low Pressure RO Element
Brief Introduction
ULP series (ultra low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of surface water and underground water. Its operation pressure is about 2/3 of low pressure membrane, and the rejection rate can reach 99.5%. Thus it can reduce the investment cost of related pumps, pipelines, containers and other equipments and the operation cost of RO system, improve economic benefits.
Scope of Application
ULP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 2000 ppm. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
Reviews
There are no reviews yet.