Seko Elektra Motor Driven Pump
$0.00
EKO Elektra – Smart IoT Pump Controller
SEKO Elektra is an IoT-enabled controller that provides real-time and historical pump data from anywhere via PC, laptop, tablet, or smartphone. Designed for the Spring Series motor-driven dosing pumps, it allows remote monitoring and adjustment of dosing and flow rate for improved accuracy and efficiency.
With 24/7 alarm monitoring and maintenance alerts, Elektra helps reduce downtime, optimize performance, and simplify preventive maintenance while lowering operating costs.
Related products
MISO Centrifugal Pump
Duty Parameters
- Capacity: up to 750 m³/h
- Head: up to 170 m
- Temperature range: -20°C to 120°C
- Delivery size: 32 – 150 mm
Design Features
- End suction, top discharge centrifugal pump type
- Single-stage construction
- Closed impeller design for improved efficiency
- Sealing options: gland packing or mechanical seal
Applications
- HVAC systems
- Water transfer and distribution systems
- Firefighting systems
- Cooling tower circulation
- Drinking water supply systems
2GK Dynamic Centrifugal Pump
Application Limits
- Maximum suction head: 8 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 5 bar
- Voltage fluctuation: within ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Suitable for transferring clean water without abrasive particles or liquids with similar properties to water
- Commonly used in garden irrigation and vegetable greenhouse water supply
- Ideal for livestock and breeding industry water supply and drainage
- Applicable for use with various supporting equipment and systems
WJ Multistage Horizontal Centrifugal Pump
Technical Data
- Power supply: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Maximum inlet pressure: 2 bar
- Fluid temperature range: +5°C to +35°C
- Maximum operating pressure: 6 bar
- Protection class: IP44
- Suction and discharge connection: G 1
Design Features
- Pump housing made of stainless steel (1.4301)
- Impeller made of stainless steel (1.4301)
- Shaft made of stainless steel (1.4005)
- Mechanical seal: ceramic/carbon
- Diffuser and injector made of Noryl
- Seals made of NBR
Applications
- Pumping water from wells
- Filling, emptying, and transferring water
- Irrigation and sprinkler systems
- Emergency pumping for overflow situations
Heron Industrial RO Membrane
Heron Industrial RO Membrane Elements are made by the most advanced technique polyamide Japanese RO membrane sheets and combined with experience in the process of rolling membranes for years. Heron Industrial RO Membrane performance is excellent and continuously stable exceptionally. Covering a complete range from 200GPD to 13200GPD.
FEATURES OF HERON INDUSTRIAL RO MEMBRANE
Uses the most advanced USA membrane film technology and manufacturing processes
Provides high rejection stability even with high TDS manufactured in our ISO 9001:2008 Certified Facilities,
No fouling, Less frequency cleaning, and More Consistent
100% Performance and Quality Tested before shipment
Backed up by our Experienced Technical Support Staff for designing the plant.
High Quality for Consistent and Reliable Performance
Standard and universal dimensions to fit in commonly available housings
Require lower consumption of chemicals and longer life.
Vonmtron-XLP
XLP Series: Extremely Low Pressure RO Element
Brief Introduction
XLP series (extremely low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of surface water and underground water. Its operation pressure is about 1/2 of low pressure membrane, and the rejection rate can reach 98%. Thus it can reduce the investment cost of related pumps, pipelines, containers and other equipments and the operation cost of reverse osmosis system, improve economic benefits.
Scope of Application
XLP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 1000 ppm, It is especially suitable for the second pass of two-pass RO system. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
Specifications and Major Properties
MPM Centrifugal Pump
Duty Parameters
- Capacity: up to 360 m³/h
- Head: up to 105 m
- Temperature: up to 140°C
- Delivery size: DN 32 – DN 250
Design Features
- Horizontal mounting configuration
- Single-stage, close-coupled design
- KTL coating for enhanced corrosion protection
- 3-phase standard IEC motor with IP55 protection
- Mechanical seal for reliable sealing performance
Applications
- Building service systems
- Hot water circulation
- Water-glycol mixture handling
- Cold water transfer without abrasive particles or solids
- Filter feed systems and water lifting applications
Gks Series Centrifugal Pump
Application Limits
- Maximum suction head: 9 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 6 bar
- Voltage fluctuation: not more than ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Designed for transferring clean water free from abrasive particles or liquids with similar properties to water
- Commonly used for well water extraction, garden irrigation, greenhouse water supply, livestock farming water systems, and pipeline pressure boosting
Reviews
There are no reviews yet.