| Model | Power | Ports | Capacity | Head | ||||
|---|---|---|---|---|---|---|---|---|
| Three Phase | Single Phase | KW | HP | Suction (mm) | Delivery (mm) | m³/hr | LPM | Meter |
| FMHIL 103 | 0.37 | 0.5 | 25 | 25 | 0.5-3.0 | 8.34-50.01 | 27-12 | |
| FMHIL 504 | 0.75 | 1 | 32 | 25 | 0.5-8.0 | 8.34-133.36 | 42.5-12.0 | |
FMHIL Multistage Horizontal Centrifugal Pump
$0.00
Duty Parameters
- Capacity: up to 25 m³/h
- Head: up to 68 m
- Temperature: up to 110°C
- Delivery size: DN 25 – DN 32
Design Features
- Single-pump pressure boosting system
- Available in horizontal or vertical inline configurations
- Corrosion-resistant wetted components for enhanced durability
Applications
- Pressure boosting in residential buildings
- Bathroom shower systems and panels
Description
Related products
Vontron-ULP
ULP Series And Series: Ultra-Low Pressure RO Element
Brief Introduction
ULP series (ultra low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of surface water and underground water. Its operation pressure is about 2/3 of low pressure membrane, and the rejection rate can reach 99.5%. Thus it can reduce the investment cost of related pumps, pipelines, containers and other equipments and the operation cost of RO system, improve economic benefits.
Scope of Application
ULP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 2000 ppm. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
Grampus A Series Submersible High Head Pump
- Special waterproof treatment on the cable and core wire to prevent moisture from entering the motor
- Lightweight, durable, and corrosion-resistant construction
- Precision-balanced rotor and impeller for extended bearing life
- Stainless steel shaft, motor housing, screws, and strainer for superior corrosion resistance
- High performance, stable operation, low power consumption, and high flow capacity
- Easy installation and maintenance
- High-quality dual SiC mechanical seal for reliable sealing performance
- Class B (130°C) insulated motor with IEC IP68 protection
- Built-in thermal overload protector to prevent overheating and motor burnout
DPM Centrifugal Pump
Application Limits
- Maximum suction head: 8 m
- Maximum liquid temperature: +60°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 6 bar
- Voltage fluctuation: within ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Suitable for transferring clean water without abrasive particles or liquids with properties similar to water
- Widely used in industrial and municipal water supply systems
- Ideal for high-rise building pressure boosting
- Applicable in fire protection systems and livestock/breeding water supply
Vonmtron-XLP
XLP Series: Extremely Low Pressure RO Element
Brief Introduction
XLP series (extremely low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of surface water and underground water. Its operation pressure is about 1/2 of low pressure membrane, and the rejection rate can reach 98%. Thus it can reduce the investment cost of related pumps, pipelines, containers and other equipments and the operation cost of reverse osmosis system, improve economic benefits.
Scope of Application
XLP series RO element normally suitable for treatment of surface water, underground water and municipal water with TDS is less than 1000 ppm, It is especially suitable for the second pass of two-pass RO system. It is mainly applied in bottle water, drinking water, boiler replenishment water, food processing and pharmaceutical manufacturing industries and other fields.
Specifications and Major Properties
MHIL Multistage Horizontal Centrifugal Pump
Technical Data
- Flow: up to 13 m³/h
- Head: up to 68 m
- Temperature range: -15°C to +90°C
- Operating pressure: 10 bar
- Maximum inlet pressure: 6 bar
Design Features
- Stainless steel impeller for enhanced durability
- Wetted parts made from stainless steel
- High-efficiency motor suitable for wide voltage fluctuations
- Low-noise (silent) operation
- Lightweight design for easy carrying, installation, and operation
Applications
- Commercial and industrial use
- Washing and spraying systems
- Cooling and cold water circulation systems
Gks Series Centrifugal Pump
Application Limits
- Maximum suction head: 9 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 6 bar
- Voltage fluctuation: not more than ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Designed for transferring clean water free from abrasive particles or liquids with similar properties to water
- Commonly used for well water extraction, garden irrigation, greenhouse water supply, livestock farming water systems, and pipeline pressure boosting
Reviews
There are no reviews yet.