| Model | Active Membrane | Permeate flow | Stable Rejecion | Feed Spacer |
|---|---|---|---|---|
| Area ft2(m2) | GPD(m3/d) | Rate % | Thickness Mil | |
| LP22-8040-440 | 440（40.9） | 11500（43.5） | 99.7 | 28 |
| LP22-8040 | 400（37.2） | 10500（39.7） | 99.7 | 28 |
| LP22-8040/31 | 400（37.2） | 10500（39.7） | 99.7 | 31 |
| LP22-8040PRO | 400（37.2） | 11000（41.6） | 99.7 | 28 |
| LP21-4040 | 100（9.3） | 2800（10.6） | 99.6 | 28 |
Vontron-LP
$0.00
LP Series: Low-Pressure RO Element
Brief Introduction
LP series (low pressure) aromatic polyamide RO element is developed by VONTRON for treatment of brackish water. It has the characteristics of low pressure in operation, high permeate flow, and excellent rejection performance in removing solvable salts, TOC, SiO2, etc. It is especially suitable for the preparation of high-purity water in the electronics and power industry.
Scope of Application
LP series is normally suitable for treatment of brackish water, surface water, underground water and municipal water with TDS is less than 10000 ppm. It is mainly used for producing various scales of bottle water, drinking water, industrial used pure water, high purity water, boiler replenishment water, also for wastewater reuse, material concentration, purification and refining purposes.
Specifications and Major Properties
Description
Related products
PURAN Brackish Water RO Membranes
Puran BWRO Membranes have performed very well in drinking water purification, power plants condensate water purification, industrial production water purification and other similar salted water purification.
Its stable salt rejection rate and high flow rate working at low pressure is bringing obvious economic benefits to our customers.
MPM Centrifugal Pump
Duty Parameters
- Capacity: up to 360 m³/h
- Head: up to 105 m
- Temperature: up to 140°C
- Delivery size: DN 32 – DN 250
Design Features
- Horizontal mounting configuration
- Single-stage, close-coupled design
- KTL coating for enhanced corrosion protection
- 3-phase standard IEC motor with IP55 protection
- Mechanical seal for reliable sealing performance
Applications
- Building service systems
- Hot water circulation
- Water-glycol mixture handling
- Cold water transfer without abrasive particles or solids
- Filter feed systems and water lifting applications
FMHIL Multistage Horizontal Centrifugal Pump
Duty Parameters
- Capacity: up to 25 m³/h
- Head: up to 68 m
- Temperature: up to 110°C
- Delivery size: DN 25 – DN 32
Design Features
- Single-pump pressure boosting system
- Available in horizontal or vertical inline configurations
- Corrosion-resistant wetted components for enhanced durability
Applications
- Pressure boosting in residential buildings
- Bathroom shower systems and panels
2GK Dynamic Centrifugal Pump
Application Limits
- Maximum suction head: 8 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 5 bar
- Voltage fluctuation: within ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Suitable for transferring clean water without abrasive particles or liquids with similar properties to water
- Commonly used in garden irrigation and vegetable greenhouse water supply
- Ideal for livestock and breeding industry water supply and drainage
- Applicable for use with various supporting equipment and systems
DPM Centrifugal Pump
Application Limits
- Maximum suction head: 8 m
- Maximum liquid temperature: +60°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 6 bar
- Voltage fluctuation: within ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Suitable for transferring clean water without abrasive particles or liquids with properties similar to water
- Widely used in industrial and municipal water supply systems
- Ideal for high-rise building pressure boosting
- Applicable in fire protection systems and livestock/breeding water supply
WJ Multistage Horizontal Centrifugal Pump
Technical Data
- Power supply: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Maximum inlet pressure: 2 bar
- Fluid temperature range: +5°C to +35°C
- Maximum operating pressure: 6 bar
- Protection class: IP44
- Suction and discharge connection: G 1
Design Features
- Pump housing made of stainless steel (1.4301)
- Impeller made of stainless steel (1.4301)
- Shaft made of stainless steel (1.4005)
- Mechanical seal: ceramic/carbon
- Diffuser and injector made of Noryl
- Seals made of NBR
Applications
- Pumping water from wells
- Filling, emptying, and transferring water
- Irrigation and sprinkler systems
- Emergency pumping for overflow situations
Gks Series Centrifugal Pump
Application Limits
- Maximum suction head: 9 m
- Maximum liquid temperature: +40°C
- Maximum ambient temperature: +40°C
- Maximum working pressure: 6 bar
- Voltage fluctuation: not more than ±10% of the rated value
- pH range: 6.5 – 8.5
Application Areas
- Designed for transferring clean water free from abrasive particles or liquids with similar properties to water
- Commonly used for well water extraction, garden irrigation, greenhouse water supply, livestock farming water systems, and pipeline pressure boosting
Reviews
There are no reviews yet.